Add or modify a device (Type=0)

Adding or modifying a device requires

Section [Setup]

Entry Value/Example Description Mand.
FQOUName /OU1/OU2 Fully-qualified name of the OU to which the device will be added ✓
ForceDBWrite 0|1 Determines whether the imported configuration is written to the database even if no changes are visible  
Name Client1 Name of the device ✓
MAC 001122334455 MAC address of the device

This address is used to determine whether a device is already registered in the Scout infrastructure. If so, the existing configuration data is changed.

 ✓
Info1 Information on the device  
Info2 Information on the device  
Info3   Information on the device  
UseParentAppDefaults 0|1 The software defaults defined for this OU are applied.  
UseParentApps 0|1 Use applications defined in parent OUs

 
UseParentScreenSettings 0|1 Determines whether the screen settings of the parent OU are used

If 0, specify the values for Prop_Resolution, Prop_Frequency and Prop_ColorDepth

Prop_Resolution 1024x768 Screen resolution (property)

 
Prop_Frequency 60 Screen refresh rate (property)

 
Prop_ColorDepth 16 Screen color depth (property)  
       
IniEntryFile#

IniEntrySection#

IniEntryKey#

IniEntryValue#

Set advanced file entries

To define one advanced file entry, four entries with the same number are required
# represents a number between 1 and 255

If no entries are defined, existing entries will be removed.

 
       
FileSrc#

FileDst#

Configured file transfer
For one file, both entries with the same number are required
# represents a number between 1 and 255

If no entries are defined, existing entries will be removed.

  
UseParent 0|1 Determines, whether the device configuration is inherited fro the parent instance or an independent device configuration is created

For UseParent=0, you can set all configuration data subsequently.

  
IpAddress

IP address of the device  
DefaultPrinter

 
DefaultPrinterType

 
DriverNames

 

 

  
LastApplicationAction #ON
#OFF
#REBOOT
#RESTARTX
#MSG
#CUSTOMCOMMAND #UPDATE
#DELIVERY
#FACTORYRESET 		Specifies the action after the last client application has been closed  
LastApplicationActionDelay 0 Delay before the action is performed  
UseParentPeerIP 0|1 Determines whether the peer IP settings of the parent OU are used.  
UsePeerIP 0 Determines whether the alternative (peer) IP address of the device is used.  
UseParentPartitions 0|1 Determines whether the partition settings of the parent OU are used.  
RootPartitionSize 128    
HomePartitionSize 0    
SwapPartitionSize 2  

 

  

 

  
WOLServer WakeOnLan server  
UseParentMousKBSettings 0|1 The mouse/keyboard settings of the parent OU are used.
Prop_Emulate3Buttons empty or Emulate3DButtons Determines whether three mouse buttons are emulated

 
Prop_multiClickTime   Double-click speed  
Prop_Buttons
auto
none
2
3
5
Auto-detection
No mouse
Two-button mouse
Three-button mouse
Wheel mouse

 
Prop_PointerSpeed   Mouse pointer speed  
Prop_XkbLayout   Keyboard language  
Prop_Numlock   Initial Num Lock state  
Prop_DontVTSwitch   Allows switching consoles with Ctrl-Alt-F1...F12  
Prop_DeadKeys   Dead keys  
Prop_KeyboardDelay   Keyboard delay  
Prop_KeyboardSpeed   Key repetition rate  

Note: