Options of a power management profile

• To edit the options, open the Power saver or High performance profile.
  If available, then select the subprofile Working hours or Default ( non-working hours).1 for eLux RP 6.8 and later versions and Scout 15.8

Option	Description
Screen brightness	Screen brightness in percent for the selected profile
Turn off the display – after	Determines whether, after a specified number of minutes (after), the display is turned off when the user is not using the device (idle state)
Enable screen saver – after	Determines whether, after a specified number of minutes (after), the screen saver is enabled when the user is not using the device (idle state)
On idle – after – after (User logged off)2 from eLux RP 6.10 – action	Determines whether, when the device is not used (idle state), after a specified number of minutes (after), the selected action is performed: Shut down Sleep mode This option can be specified for both states: user logged on and user logged off
Action on 'Closing the lid'	Action that is performed when users close the lid: No action Turn the display off Shut down Sleep mode
Action on 'Pressing the power button'	Action that is performed when users press the power button: No action Turn the display off Shut down Sleep mode
Action on 'Pressing the Power/Sleep key' 3 for eLux RP 6.5 and later versions	Action that is performed when user press the Power/Sleep key on their keyboard (requires a suitable keyboard):4 If this key is not available, the configuration has no effect. No action Shut down Sleep mode5 Default

The sleep mode corresponds to Suspend to RAM (S3). For further information, see Sleep mode (Suspend) in the Scout guide.